Edward Robbins Mon, 26 Nov 2012 08:11:16 -0800
Hmmm... so now I'm having trouble installing to NAND. I've done it 4
times so far using different USB drives. I get a couple of messages
about bad blocks, and then when u-boot starts I get:
Loading from device 0: <NULL> at 0x8000000 (offset 0x0)
Image Name: Linux-2.6.16-omap2
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1576804 Bytes = 1.5 MB
Load Address: 10008000
Entry Point: 10008000
** Read error on 0
## Booting image at 11d00000 ...
Image Name: Linux-2.6.16-omap2
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1576804 Bytes = 1.5 MB
Load Address: 10008000
Entry Point: 10008000
Verifying Checksum ... Bad Data CRC
E3 #
Has anyone else had this problem? Sorry for the torrent of emails!
On Mon, Nov 26, 2012 at 2:25 PM, Edward Robbins
<edd.robb...@googlemail.com> wrote:
> Ok, got it finally.
>
> Now installing to NAND so I guess I wont need this much now anyhow!
>
> On Mon, Nov 26, 2012 at 2:00 PM, Edward Robbins
> <edd.robb...@googlemail.com> wrote:
>> Hmm... worked that once but no dice a second time... is this a common issue?
>>
>> On Mon, Nov 26, 2012 at 1:32 PM, Edward Robbins
>> <edd.robb...@googlemail.com> wrote:
>>> Ok, so I just tried it with debugging and it has booted!
>>>
>>> Cheers,
>>> Ed
>>>
>>> On Mon, Nov 26, 2012 at 1:18 PM, Edward Robbins
>>> <edd.robb...@googlemail.com> wrote:
>>>> Hi again,
>>>>
>>>> I've got some free time today and have been playing with the emailer
>>>> again. I've managed to build a 3.6 kernel a while ago but when I tried
>>>> to upload the V2 stuff I had problems.
>>>>
>>>> Today I made up a new cable thinking that might be the issue, but it
>>>> hasn't helped. I can get a boot log just fine, but when I run pbltool
>>>> with "sudo ./pbltool -f /dev/ttyUSB0 oe-install.pbl" I get:
>>>>
>>>> Prodding...
>>>> Handshaking...
>>>> Done handshaking
>>>> Compressed return block?
>>>> Flushing: 0x00
>>>> Flushing: 0x0E
>>>> Flushing: 0x00
>>>> Flushing: 0x82
>>>> Flushing: 0x00
>>>> Flushing: 0x52
>>>> Flushing: 0x00
>>>> Flushing: 0x04
>>>> Flushing: 0x09
>>>> Flushing: 0x1F
>>>> Flushing: 0x05
>>>> Flushing: 0x10
>>>> Flushing: 0x40
>>>> Flushing: 0xFE
>>>> Flushing: 0x7B
>>>> Flushing: 0x0E
>>>> Flushing: 0xB0
>>>> Flushing: 0x9A
>>>> Compressed return block?
>>>>
>>>> Which then repeats forever. I've tried editing oe-install.pbl to
>>>> change the baud rate (38400, 19200, 9600) but it makes no difference.
>>>> I also looked for pblq but the link on
>>>>
cowlark.com/amstrad/index.html is broken.
>>>>
>>>> Any ideas?
>>>>
>>>> Thanks!